Telecommunications Building Cabling Systems Planning and Design


Telecommunications Building Cabling Systems Planning and Design






Download :    pdf1 



File : pdf, 1.7 MB, 45 pages



TOC



CHAPTER 1  TELECOMMUNICATIONS BUILDING CABLING SYSTEM

1-1  OVERVIEW

1-2  References

1-3  ACRONYMS AND ABBREVIATIONS

1-4  Responsibilities

1-5  Scope

1-6  Objective



CHAPTER 2  BUILDING TELECOMMUNICATIONS CABLING SYSTEM SPECIFICATIONS

2-1  Classified Information Infrastructure

2-2  System Overview

2-3  Workstation Outlet

2-4  Building Telecommunications Wiring

2-4.1  Horizontal Cable

2-4.1.1  Copper Voice and Data

2-4.1.2  Fiber Optic Cable

2-4.1.3  Cable Length

2-4.2  Backbone Cable

2-4.2.1  Copper Backbone Cable

2-4.2.2  Copper Termination

2-4.2.3  Fiber Optic Backbone Cable

2-4.3  CATV or CCTV Cable

2-4.4  Building Infrastructure

2-5  Telecommunications Room

2-5.1  Multi-Story Buildings

2-5.2  Telecommunications Room Sizing

2-5.3  Room Interior Finishes

2-5.4  Room Door

2-5.5  Room Location

2-5.6  Telephone Backboards

2-5.7  Equipment Racks

2-5.8  Equipment Cabinets

2-5.9  Unshielded Twisted Pair Patch Panels

2-5.10  Fiber Optic Patch Panels

2-5.11  Ladder and Wire Cable Tray

2-5.12  Room Lighting

2-5.13  Room Climate Control

2-5.14  Room Contaminants

2-5.15  Electrical Power

2-5.16  Voice Communications

2-6  Equipment Room

2-6.1  Equipment Room Provisioning

2-7  Grounding

2-7.1  Building Earth Electrode Subsystem (EES)

2-7.2  Cable Entrance Grounding

2-7.3  Telecommunications Room Signal Ground

2-7.4  Telecommunications Rack and Supporting Structure

2-8  Telecommunications System Labeling

2-8.1  Outlet/Patch Panel Labels

2-8.2  Conformance to Existing Standards

2-8.3  Telecommunications Outlet Labeling

2-8.4  Telecommunications Patch Panel Labeling

2-8.5  Distribution System Labeling

2-9  Building Entrance Facility

2-9.2  Protected Entrance Terminals (PET)

2-9.3  Fiber Termination Device

2-10  Testing

2-10.1  Unshielded Twisted Pair Tests

2-10.2  Category 5e and 6 Circuits

2-10.3  Coaxial Cable

2-10.4  Fiber Optic Cable

 

FIGURES

Figure 1  TELECOMMUNICATIONS ROOM ENTRANCE AND BACKBONE DIAGRAM2

Figure 2  TELECOMMUNICATIONS ROOM HORIZONTAL DISTRIBUTION DIAGRAM

Figure 3  TELECOMMUNICATIONS ROOM STANDARD SUPPORTING STRUCTURE AND BACKBONE

Figure 4  TELECOMMUNICATIONS ROOM STANDARD PREMISE DISTRIBUTION

Figure 5  TELECOMMUNICATIONS ROOM HIGH DENSITY PREMISE DISTRIBUTION

Figure 6  TELECOMMUNICATIONS OUTLET TYPES

Figure 7  SYSTEMS FURNITURE WIRING

Figure 8  PREMISE DISTRIBUTION SUPPORTING STRUCTURE - RENOVATION

Figure 9  TYPICAL FLOOR PLAN

Figure 10  J-STD-607A GROUNDING

Figure 11  MIL-STD-188-124B GROUND




0 comments:

Post a Comment

I thank you for taking time to visit my blog. I appreciate your comment which motivates me and also helps me improve the contents on my Blog.
Your comments also make these posts much more interesting to read. Please do continue to leave your views and if you have any queries regarding my recipes I would do my best to reply to them ASAP.

Cheers
Analog Designer

Related Posts

  © Blogger templates by Template-Service

Back to TOP